| Local Input Channels |
24 Balanced Analog. +4dBv Nominal, +24dBv Maximum. 3 X D-25F Connectors |
| Input Impedance |
Approx. 25K Ohms, Balanced to Ground |
| Local Output Channels |
24 Balanced Analog. +4dBv Nominal, +24dBv Maximum. 3 X D-25F Connectors |
| Output Impedance |
Approx. 100 Ohm, Active Differential, Balanced to Ground |
| THD+Noise |
Less than 0.01% Input to Output or through Audio Network |
| Signal-to-Noise Ratio |
Greater than 100dB below peak level, bandwidth-limited to 25KHz |
| Frequency Response |
+/- 0.1 dB 20 - 20K Hz, relative to 1000 Hz. |
| Level Adjustment Range |
-20dB to +12dB relative to Unity |
| A/D and D/A Conversion |
24-bit, 48KHz |
| Digital Processing |
24-Bit Uncompressed, 48KHz |
| Audio Network Format |
Dante - Gigabit Ethernet |
| Network TX/RX Capability |
32 Channels Transmit and 32 Channels Receive Simultaneously |
| Network Connections |
Two RJ45 Gigabit Ethernet, Two single-mode bidirectional ST Fiber Gigabit Ethernet |
| PL Matrix |
Each of 16 network four-wire PLs assignable to any of 8 four-wire analog PL circuits |
| VU Meter |
Conventional VU Ballistics (300ms). -20 to +3.5 dB Scale |
| Headphone Jack |
1/4" TRS, Stereo, Low-Impedance. HP and meter follow output selection |
| Power Requirements |
95 to 250 Volts AC, 50-60Hz. 10 Watts |
| Cabinet Dimensions |
1.75" High, 19" Wide, 9" Deep. (1 Rack Unit). 44.5mm X 482mm X 228mm |
